Alpine tue-t152 Benutzerhandbuch
FR
ES
DE
SE
IT
9
-EN
In Case of Difficulty
If you encounter a problem, please review the items in
the following checklist. This guide will help you isolate
the problem if the unit is at fault. Otherwise, make sure
the rest of your system is properly connected or consult
your authorized Alpine dealer.
the following checklist. This guide will help you isolate
the problem if the unit is at fault. Otherwise, make sure
the rest of your system is properly connected or consult
your authorized Alpine dealer.
No power supplied.
• Vehicle's ignition is off.
- Turn the ignition on.
• No fuse or blown fuse.
- Check the cause and replace the fuse.
• Incorrect connections.
- Check connection and remedy.
• Vehicle's battery is weak.
- Check the voltage of vehicle's battery.
Remote control does not work.
• Battery is worn out.
- Replace battery.
• Incorrect battery insertion.
- Insert battery correctly.
• Remote control does not point remote control sensor.
- Operate remote control so that it faces the sensor.
• Remote control sensor or remote control transmitter
window is dirty.
- Clean remote control sensor or transmitter window.
Picture not clear or noises appear.
• Poor signal strength.
• Out of service area of station being received.
• Out of service area of station being received.
- Check by moving car in other location.
• Fluorescent tube is exhausted.
- Replace the fluorescent tube.*
No picture obtained.
• Mode switch is not set to a desired mode.
- Select desired mode by pressing TV/NAV./VIDEO
button.
• Temperature inside car is high.
- Lower the temperature.
• Poor connections between monitor and tuner.
- Check connections.
Dots or stripes appear on picture.
• Affected from neon sign, high voltage line, amateur radio
transmission, cars, etc.
- Move car to a location free from interference.
Double or triple pictures or rolling picture appear.
• Signals are reflected by mountain or buildings near car.
- Move car to other locations. Adjust location, direction
and height of antenna.
Noises appear in car radio.
• High frequency signals from TV are received by car
radio.
- Keep away antenna leads and other wire leads from TV.
Too much voice noise is heard.
• TV area is improper.
- Confirm the setting for a TV area.
Information
Audio interruption function does not work in
combination with navigation system.
combination with navigation system.
• TV channel 56 is received.
- Switch channel other than 56.
• Poor connection of guide control input cord.
- Connect guide control cord of navigation securely.
Channel display is incorrect.
• The field strength is low.
- Move the car to other location and check it again.
Picture becomes whitish.
• Located under a TV tower.
- Move the car to other location to use it.
- If you want to use in that location, turn the TV antenna's
- If you want to use in that location, turn the TV antenna's
booster switch to off position.
* The fluorescent tube replacement is not free of charge
even within the warranty period, for the tube is an article
of consumption.
of consumption.
MODE button does not work well.
• Even if pressing the MODE button, TV area setup menu
screen does not come out.
- Press the button after changing TV band to TV1 or
TV2. It cannot be operated if it is TV3.
TV area cannot be changed.
• Even if trying to change the TV area, it stays to be the
former one.
- Change the TV area again, and press and hold the
MODE button at least 1 second.
Specifications
TV Tuner
Color System .................................................... PAL/SECAM
Channel Selection System ........... PLL Frequency Synthesizer System
Channel Coverage
Channel Selection System ........... PLL Frequency Synthesizer System
Channel Coverage
* As for TV area 7 to 11, refer to the TV area list on page 6.
Antenna Input ... 4-channel diversity (75 ohms, 3.5 ø mini-jack)
Maximum Sensitivity (–6 dB Output) ... 35 dB
Maximum Sensitivity (–6 dB Output) ... 35 dB
µ
(at 471 MHz)
Video/Audio S/N (75 dB
µ
) ................................ 45 dB/50 dB
Video Output System ...................................................... PAL
Video Output Level ....................................... 1.0p-p/75 ohms
Audio Output Level .................................. 500mV/10k ohms
Video Output Level ....................................... 1.0p-p/75 ohms
Audio Output Level .................................. 500mV/10k ohms
General
Operating Votage ................................. DC14.4V (11 to 16V)
Operating Current ....................................................... 250mA
Operating Temperature Range ...................... –10
Operating Current ....................................................... 250mA
Operating Temperature Range ...................... –10
°
C ~ +60
°
C
Storage Temperature Range .......................... –20
°
C ~ +80
°
C
Dimensions (mm) ............. 196.2 (W) x 119.9 (D) x 33.5 (H)
TV Antenna Unit
Output Impedance .......................... 75 ohms, 3.5 ø mini-jack
Operating Voltage ............................... DC14.4V (11 to 16V)
Operating Current ......................................................... 50mA
Operating Temperature Range ...................... –10
Operating Voltage ............................... DC14.4V (11 to 16V)
Operating Current ......................................................... 50mA
Operating Temperature Range ...................... –10
°
C ~ +60
°
C
Television System CH
PAL-B/G
PAL-I/I
SECAM-L SECAM-D/K SECAM-B/G
Channel Coverage VHF
2~12 ch
A~J ch
–
1~12 ch
2~12 ch
A~H2 ch
–
–
–
–
UHF
21~69 ch