Alpine tue-t152 Benutzerhandbuch

This TV TUNER can be placed inside the trunk,
on the kick panel of the front passenger's seat or
underdash. However, to avoid unnecessary
signal wiring, it is better to mount the TV TUNER
as close as possible to the Display.

DO NOT MOUNT THE UNIT IN LOCATIONS
THAT WILL BE IN THE VICINITY OF MOIS-
TURE OR EXTREME HEAT (such as the engine
compartment).

Make sure you have all the necessary parts and
tools. Then, begin mounting according to one of
the following procedures:

This installation method is suggested when the
mounting location does not permit drilling.
USE THIS METHOD ONLY WHEN THE UNIT IS
MOUNTED ON A HORIZONTAL SURFACE.
NEVER MOUNT A UNIT UPSIDE-DOWN USING
THE VELCRO TAPE.

1 Remove the adhesive protective paper from

one side of the Velcro fasteners.

2 Attach the exposed adhesive side to the

underside of the unit, in a central location. Do
not cover the serial number.

3 Make sure the mounting location is clean, dry

and free from contaminants.

4 Remove the protective strip from the other side

of the Velcro pad.

5 Press the unit onto its mounting location.

Velcro fastener

Park the vehicle in a flat, safe place. Apply the
parking brake, then remove the ignition key.

Check the included parts and organize the tools
and installation instructions.

Disconnect the battery’s minus terminal.

Infrared remote 

control unit

(5.5m)

Antenna clamper

 (x4)

Cable clamper

 (x4)

TV Antenna 

(L/R) (6m)

Remote control

Power cable

(2m)

Velcro fastener

PIN connection cable

(2m)

(Double-sided 
adhesive tape)

Battery (AAA)

x 2