Alpine tdm-7576r Benutzerhandbuch
19
-EN
Indication for CD Changer
• Protective circuit is activated due to high temperature.
- The indicator will disappear when the temperature
returns to within operation range.
• Malfunction in the CD Changer.
- Consult your Alpine dealer. Press the magazine eject
button and pull out the magazine.
Check the indication. Insert the magazine again.
If the magazine cannot be pulled out, consult your
Alpine dealer.
Check the indication. Insert the magazine again.
If the magazine cannot be pulled out, consult your
Alpine dealer.
• Magazine ejection not possible.
- Press the magazine eject button. If the magazine does
not eject, consult your Alpine dealer.
• A disc is left inside the CD Changer.
- Press the Eject button to activate the eject function.
When the CD Changer finishes the eject function,
insert an empty CD magazine into the CD Changer to
receive the disc left inside the CD Changer.
insert an empty CD magazine into the CD Changer to
receive the disc left inside the CD Changer.
• No magazine is loaded into the CD Changer.
- Insert a magazine.
• No indicated disc.
- Choose another disc.
HI TEMP
ERROR - 01
ERROR - 02
NO MAGZN
NO DISC
Specifications
FM TUNER SECTION
Tuning Range
87.5 – 108.0 MHz
Mono Usable Sensitivity
0.7
µ
V
50 dB Quieting Sensitivity
1.1
µ
V
Alternate Channel Selectivity 80 dB
Signal-to-Noise Ratio
Signal-to-Noise Ratio
65 dB
Stereo Separation
35 dB
MW TUNER SECTION
Tuning Range
531 – 1,602 kHz
Sensitivity (IEC Standard)
25.1
µ
V/28 dB
LW TUNER SECTION
Tuning Range
153 – 281 kHz
Sensitivity (IEC Standard)
31.6
µ
V/30 dB
TAPE PLAYER SECTION
Tape Speed
1-7/8 ips (4.8 cm/sec)
±
0.7%
Wow & Flutter
0.06% WRMS
Signal-to-Noise Ratio
With Dolby B-TYPE NR
(TDM-7577R/
TDM-7576R only)
With Dolby B-TYPE NR
(TDM-7577R/
TDM-7576R only)
68 dB
Without Dolby NR
60 dB
Frequency Response
With Alpine Test Tape
With Alpine Test Tape
30–20,000 Hz
REMOTE CONTROL
(TDM-7577R/TDM-7576R only)
Battery Type
AAA batteries (2 pcs.)
REMOTE CONTROL SIZE
(TDM-7577R/TDM-7576R only)
Width
56 mm (2-1/4")
Height
14 mm (9/16")
Depth
105 mm (4-1/8")
Weight
50 g (1.8 oz)
GENERAL
Power Requirement
14.4 V DC
(11–16 V allowable)
(11–16 V allowable)
Maximum Power Output*
40 W
×
4
Maximum Pre-Output Voltage 2 V/10k ohms
Bass
Bass
±
15 dB at 30 Hz
Treble
±
10 dB at 10 kHz
Weight
1.4 kg (3 lbs. 1 oz)
CHASSIS SIZE
Width
178 mm (7")
Height
50 mm (2")
Depth
155 mm (6–1/8")
NOSEPIECE SIZE
Width
170 mm (6–3/4")
Height
46 mm (1–13/16")
Depth
19 mm (3/4")
* Under maximum operating voltage and input signal, into 4
ohms.
Due to continuous product improvement, specifications and
design are subject to change without notice.
design are subject to change without notice.