ASUS mypal a600 Benutzerhandbuch
Avolites Pearl 2000 Operators Manual - page
35
P2000MAN.DOC 19/10/99 17:59
The VGA Screen will automatically show you all 30 Handles for the current Page of
Fixtures and Attribute Bank.
Fixtures and Attribute Bank.
•
Select the Attribute Bank of the Attribute you wish to change.
Its LED
lights up.
The Channels are displayed on the VGA monitor as INSTANT or FADING.
•
Press a Preset SWOP or ADD buttons on the Handle of each Fixture
you wish to change.
ADD buttons toggle Channels on the upper Attributes; SWOP
buttons toggle Channels on the lower Attributes on each Bank. You can change Pages of
Fixtures if necessary.
Fixtures if necessary.
•
Press EXIT twice to leave the function.
Puts you back in LIVE PROGRAM
MODE menu.
4.5 Inverted Channels
Sometimes it may be useful to Invert a channel. This will mean that when
the Fader is down the channel will output at full, and when the Fader is at full
the channel will output 0%.
the Fader is down the channel will output at full, and when the Fader is at full
the channel will output 0%.
4.5.1 To Invert a channel
It is possible to toggle between Inverted and Normal Channels. Here’s how.
•
Turn the Key to Program.
Puts you in LIVE PROGRAM MODE.
•
Press the PATCH button on the blue Program Select bank.
Puts you in the
PATCH DIMMER OR DEVICE menu.
The VGA Screen will automatically change to show which DMX addresses are in
use.
•
Press Softbutton A [INVERT].
The VGA Screen will automatically show you all 30 Handles for the current Page of
Fixtures and Attribute Bank.
Fixtures and Attribute Bank.
•
Select the Attribute Bank of the Attribute you wish to change.
Its LED
lights up.
The Channels are displayed on the VGA monitor as NORMAL or INVERTED.
•
Press the Preset SWOP or ADD buttons of the Handle of each Fixture
you wish to change to toggle the mode.
ADD buttons toggle Channels on the
upper Attributes; SWOP buttons toggle Channels on the lower Attributes on the Attribute
Banks. You can change Pages of Fixtures if necessary.
Banks. You can change Pages of Fixtures if necessary.
•
Press EXIT twice to leave the function.
Puts you back in LIVE PROGRAM
MODE menu.
⇒
Set up any Inverted Channels before you start programming otherwise
your looks will not replay in the way you expect.
4.6 To swap Pan and Tilt
Sometimes it can be convenient to be able to swap Pan with Tilt on certain
Fixtures, so that the orientation of a group of moving mirrors becomes
consistent.
Fixtures, so that the orientation of a group of moving mirrors becomes
consistent.
To do this :
•
Turn the Key to Program.
Puts you in LIVE PROGRAM MODE.
•
Press Softbutton F [PATCH UTILITIES].
Puts you in PATCH UTILITIES menu.