ASUS p7f-m ws Benutzerhandbuch

2-14

Chapter 2: Hardware information

Unplug the power supply before adding or removing DIMMs or other 

system components. Failure to do so can cause severe damage to both the 

motherboard and the components.

To install a DIMM:
1.  Press the retaining clips outward 

to unlock a DIMM socket.

2.  Align a DIMM on the socket 

such that the notch on the DIMM 

matches the break on the socket.

3.  Firmly insert the DIMM into the 

socket until the retaining clips 

snap back in place and the DIMM 

is properly seated.

To remove a DIMM:
1.  Simultaneously press the retaining 

clips outward to unlock the DIMM.

2.  Remove the DIMM from the socket.

•  A DDR3 DIMM is keyed with a notch so that it fits in only one direction. DO 

NOT force a DIMM into a socket to avoid damaging the DIMM.

•  The DDR3 DIMM sockets do not support DDR and DDR2 DIMMs. DO NOT 

install DDR or DDR2 DIMMs to the DDR3 DIMM sockets.

Support the DIMM lightly with 

your fingers when pressing the 

retaining clips. The DIMM might 

get damaged when it flips out 

with extra force.