ASUS p7f-m ws Benutzerhandbuch

ASUS P7F-M WS

4-23

Onboard LAN1/2 Boot ROM [PXE]

Allows you to configure the onboard LAN1/2 boot mode.

Configuration: [Disabled] [PXE] [iSCSI]

Serial Port1 Address [3F8/IRQ4]

Allows you to select the Serial Port1 base address.

Configuration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]

Interrupt 19 Capture [Enabled]

When set to [Enabled], this function allows the option ROMs to trap Interrupt 19.

Configuration options: [Disabled] [Enabled]

4.4.4

USB Configuration

BIOS SETUP UTILITY

Advanced

USB Configuration

Module Version - 2.24.5-13.4

USB Devices Enabled:

2 Hubs

USB Functions

[Enabled]

Legacy USB Support

[Auto]

BIOS EHCI Hand-off

[Enabled]

←→

Select Screen

↑↓

Select Item

+- Change Option

F1 General Help

F10 Save and Exit

ESC Exit

Options

Disabled

Enabled

USB Functions [Enabled]

Allows you to enabled or disable the USB function.

Configuration options: [Disabled] [Enabled]

Legacy USB Support [Auto]

Allows you to enable or disable support for legacy USB devices. Setting to [Auto]

allows the system to detect the presence of USB devices at startup. If detected, the

USB controller legacy mode is enabled. If no USB device is detected, the legacy

USB support is disabled. Configuration options: [Disabled] [Enabled] [Auto]

BIOS EHCI Hand-Off [Enabled]

Enables or disables the BIOS EHCI hand-off support.

Configuration options: [Disabled] [Enabled]