ASUS v9-p7h55e Benutzerhandbuch

4-10

Chapter 4: BIOS setup

While entering Setup, the BIOS automatically detects the presence of SATA 

devices. There is a separate submenu for each SATA device. Select a device item 

then press <Enter> to display the SATA device information.

The BIOS automatically detects the values opposite the dimmed items (Device, 

Vendor, Size, LBA Mode, Block Mode, PIO Mode, Async DMA, Ultra DMA, and 

SMART monitoring). These values are not user-configurable. These items show 

N/A if no SATA device is installed in the system.

Selects the type of IDE drive. Setting to Auto allows automatic selection of the 

appropriate IDE device type. Select CDROM if you are specifically configuring a 

CD-ROM drive. Select ARMD (ATAPI Removable Media Device) if your device is 

either a ZIP, LS-120, or MO drive.  

Configuration options: [Not Installed] [Auto] [CDROM] [ARMD]

Enables or disables the LBA mode. Setting to Auto enables the LBA mode if the 

device supports this mode, and if the device was not previously formatted with LBA 

mode disabled. Configuration options: [Disabled] [Auto]

Enables or disables data multi-sectors transfers. When set to [Auto], the data 

transfer from and to the device occurs multiple sectors at a time if the device 

supports multi-sector transfer feature. When set to [Disabled], the data transfer 

from and to the device occurs one sector at a time.  

Configuration options: [Disabled] [Auto]

This item appears only when you select the Primary IDE Master/Slave devices.