APart SBR160 Merkblatt
APart SBR160
AMPLIFIER
TECHNICAL SPECIFICATIONS
WWW.APART-AUDIO.COM
INFO@APART-AUDIO.COM
The SBR160 is a compact stereo power amplifier that can be used as a stand-alone or
modular amplifier.
modular amplifier.
The amplifier is equiped with a selectable RPO (Remote Power On) system. This means the
amplifier can be activated in three ways (Selection via the external switch at the back):
1. Via the power on switch at the front pannel
2. Via the Auto Power On setting. As soon as an audio signal is present, the amplifier will
function
3. Via the 5-24 Volt setting. An external 5-24Vdc signal will activate the amplifier.
amplifier can be activated in three ways (Selection via the external switch at the back):
1. Via the power on switch at the front pannel
2. Via the Auto Power On setting. As soon as an audio signal is present, the amplifier will
function
3. Via the 5-24 Volt setting. An external 5-24Vdc signal will activate the amplifier.
Beside this RPO system, the volume of the SBR160 can be controlled over distance via any
external remote up-down switch.
external remote up-down switch.
A bass - treble tone control, balance and headphone jack for monitoring on the front
pannel allow you to achieve a perfect HiFi sound quality.
The loudness button at the back of the amplifier enhances the low and high frequencies.
This results in a more pleasant sound at low level volumes.
pannel allow you to achieve a perfect HiFi sound quality.
The loudness button at the back of the amplifier enhances the low and high frequencies.
This results in a more pleasant sound at low level volumes.
Input Line in
Output Power (RMS Program)
Output Power (RMS Program)
Frequency Response
Tone control
Limiter
Distortion
Remote volume
Remote power on selector
Loudness
Power Supply
Dimensions (H x W x D)
Weight
Tone control
Limiter
Distortion
Remote volume
Remote power on selector
Loudness
Power Supply
Dimensions (H x W x D)
Weight
RCA Cinch unbalanced, 775 mV, 20 kOhm
8 Ohm: 2 x 60 watt / 2 x 80 watt Max
4 Ohm: 2 x 80 watt / 2 x 100 watt Max
20 Hz - 30 kHz
Bass 70 Hz +/- 10 dB, Treble 10 kHz +/- 10 dB
Dynamic-slow @ -3 dB, defeatable
<0.02%
Euroblock; via up - down contact
On/off switch on front - by audio signal - by 5-24Vdc
Via push button
230V
140 x 70 x 335 mm
3.8 Kg
8 Ohm: 2 x 60 watt / 2 x 80 watt Max
4 Ohm: 2 x 80 watt / 2 x 100 watt Max
20 Hz - 30 kHz
Bass 70 Hz +/- 10 dB, Treble 10 kHz +/- 10 dB
Dynamic-slow @ -3 dB, defeatable
<0.02%
Euroblock; via up - down contact
On/off switch on front - by audio signal - by 5-24Vdc
Via push button
230V
140 x 70 x 335 mm
3.8 Kg