Kenwood Electronics UBZ-LJ8 UBZLJ8FLE Benutzerhandbuch
Produktcode
UBZLJ8FLE
19
S
QUELCH
When no signals are present, the squelch on the transceiver
automatically mutes the speaker so you will not hear
background noise. You can however, deactivate the squelch.
This feature is useful for a variety of reasons:
automatically mutes the speaker so you will not hear
background noise. You can however, deactivate the squelch.
This feature is useful for a variety of reasons:
•
It allows you to confirm the channel activity so that you
don’t make a call while another party is using the same
channel.
don’t make a call while another party is using the same
channel.
•
It allows you to adjust the volume level without having to
wait for a call.
wait for a call.
•
When receiving a call that is intermittent due to a weak
signal, disabling the squelch will allow you to listen to the
call without it continuously cutting out.
signal, disabling the squelch will allow you to listen to the
call without it continuously cutting out.
1
Enter the Menu Settings (page 12) and
press the
press the
▲
or
▼
key until you reach the
“
” (Squelch) display.
2
Press the
key to turn the squelch
function ON (
) or OFF (
).
3
Press the PTT switch to confirm your
setting.
setting.
•
If you have turned the squelch function
OFF, the busy icon appears on the
display.
OFF, the busy icon appears on the
display.
Note: Turning the transceiver power OFF will reset the squelch to its
default setting. When the transceiver is turned back ON, squelch is
also automatically turned ON.
default setting. When the transceiver is turned back ON, squelch is
also automatically turned ON.
UBZ-LJ8 E 01-28
02.11.20, 9:44 AM
19