andi pyrolytic ax100 mtpc Benutzerhandbuch

Setting:  
Select a function by pressing the function button and set the required time with

    

   

and

   

   

buttons.

 

 

+/-

Pressing the

  

   

button increases the time set, pressing

   

  

decreases it. The count-up or countdown speed increases the 

longer the button is held in the appropriate position.  

Setting Time of Day: 
Select Time of day function by keeping

  

 

and

  

 

buttons pressed together while setting time of day with

    

    

and

   

     

buttons.  Any programme, which has been set, is cancelled and the outputs switched on. 

 

On six buttons Elect. Programmer just press the

  

  

button and the Hand symbol will come on. On five buttons Elect. 

Programmer

 

press

 

 

and

 

 

buttons together. The relay contacts will switch on. The

 

 symbol will be erased, the 

cookpot symbol

   

  

will come on. On both cases any programme, which has been set, is cancelled. 

 

Semi-Automatic Operation with cooking duration: 
Select 

 

  

function and set required end time with the

  

+ 

  

and

   

- 

 

buttons. The

 

“A”

 

and cookpot

  

  

symbols appear. 

The

 

relay output becomes active. If time of day  = cooking end time the relay output and the cookpot symbol are 

switched off. The audible signal sounds and 

 “

”  

blinks. 

 

Fully Automatic Operation: 
Select 

 

  

function and set required duration with the

   

    

and

   

    

button. The

 

symbol appears. The relay is 

switched on

 

and the cookpot symbol appears. Then select

  

  

function and the earliest possible end time is displayed. 

Set the required end time with the 

  

   

and 

  

   

buttons. The relay and the cookpot symbol are switched off. The 

cookpot symbol appears again when time of day = the calculated start time. 
At this point you can put the food in the cooking chamber, set desired oven function and cooking temperature. After the 
automatic programme has ended, the symbol

  “

”   

blinks. The audible signal is heard and the cookpot symbol and the 

relay are switched off. 

 
Minute Minder: 

Select

  

  

button and set required time with

   

   

and

  

    

button.  As the time set elapses the bell symbol is displayed. 

After the time set has elapsed, the audible signal sounds. 

 

Audible Signal: 
The audible signal (1 Hz interval) sounds at the end of a minute minder cycle or of a cooking programme for a period of 
7 minutes. The signal can be cancelled by pressing any function button. Pressing the

   

   

button without having 

previously selected a function the frequency of the signal changes. A selection from 3 possibilities can be made. The 
selected signal is audible as long as the

   

   

button is pressed. 

 

Programme Start and Verification: 
A programme, which has been set, is carried out after setting the time required. The “time-to-turn” can be verified at any 
time by selecting the appropriate function. 

 

Setting Error Identification: 
The setting is incorrect if time of day is in between the calculated cooking start and end times. If an error has been 
made, this will be indicated by the audible signal and by the symbol

  

“A”

  

flashing. The faulty setting can be corrected 

by changing one or both functions. 
 
Cancelling a Programme: 
A programme can be cancelled by selecting the manual function. After a programme, which has been set comes to an 
end, it is automatically cancelled. 

 

PROGRAMMED COOKING MODE:  Turn knob right, clockwise, and select desired cooking time. At end of 
cooking time, oven will be automatically turn off and a beep signal will be heard. Then, to stop the beeping signal you 
must push timer knob. 
 

 

                       6