Asrock 4core1333-glan Benutzerhandbuch

2 2

System Panel Header

This header accommodates

(9-pin PANEL1)

several system front panel

(see p.10 No. 15)

functions.

GND

PWRBTN#

PLED-

PLED+

DUMMY

RESET#

GND

HDLED+

HDLED-

1. High Definition Audio supports Jack Sensing, but the panel wire on the

chassis must support HDA to function correctly. Please follow the

instruction in our manual and chassis manual to install your system.

2. If you use AC’97 audio panel, please install it to the front panel audio

header as below:

A. Connect Mic_IN (MIC) to MIC2_L.

B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L.

C. Connect Ground (GND) to Ground (GND).

D. MIC_RET and OUT_RET are for HD audio panel only. You don’t

need to connect them for AC’97 audio panel.

E. Enter BIOS Setup Utility. Enter Advanced Settings, and then select

Chipset Configuration. Set the Front Panel Control option from

[Auto] to [Enabled].

F. Enter Windows system. Click the icon on the lower right hand

taskbar to enter Realtek HD Audio Manager.

For Windows

2000 / XP / XP 64-bit OS:

Click “Audio I/O”, select “Connector Settings”

, choose

“Disable front panel jack detection”, and save the change by

clicking “OK”.

For Windows

Vista

/ Vista

64-bit OS:

Click the right-top “Folder” icon , choose “Disable front

panel jack detection”, and save the change by clicking “OK”.

+5V

DUMMY

SPEAKER

GND

+12V

CPU_FAN_SPEED

FAN_SPEED_CONTROL

4 3 2 1

Chassis Speaker Header

Please connect the chassis

(4-pin SPEAKER 1)

speaker to this header.

(see p.10 No. 20)

Chassis Fan Connector

Please connect a chassis fan

(3-pin CHA_FAN1)

cable to this connector and

(see p.10 No. 12)

match the black wire to the

ground pin.

CPU Fan Connector

Please connect a CPU fan cable

(4-pin CPU_FAN1)

to this connector and match

(see p.10 No. 6)

the black wire to the ground pin.

GND
+12V
CHA_FAN_SPEED