3M 3m-matic 700r-s brochure Benutzerhandbuch
Product Use: User is responsible for determining whether the product is fit for a particular purpose and suitable for user’s method of application.
Warranty and Limited Remedy: THE FOLLOWING WARRANTIES ARE MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED
TO THE IMPLIED WARRANTY OF MERCHANTABILITY, THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND ANY IMPLIED WARRANTY ARISING OUT OF A
COURSE OF DEALING, A CUSTOM OR USAGE OF TRADE: 3M sells its 3M-Matic
TO THE IMPLIED WARRANTY OF MERCHANTABILITY, THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND ANY IMPLIED WARRANTY ARISING OUT OF A
COURSE OF DEALING, A CUSTOM OR USAGE OF TRADE: 3M sells its 3M-Matic
™
Stainless Steel Random Case Sealer 700r-s with the following warranties: 1) The Taping Head
knife blades, springs and rollers will be free from all defects for ninety (90) days after delivery. 2) All other Taping Head parts will be free from all defects for three (3) years after
delivery. 3) All other parts will be free from all defects for two (2) years after delivery.
delivery. 3) All other parts will be free from all defects for two (2) years after delivery.
Please refer to individual data pages for additional details and exceptions.
If any 3M-warrantied part is proved to be defective within its warranty period, then the exclusive remedy and 3M’s and seller’s sole obligation shall be, at 3M’s option, to repair or
replace the part, provided the defective part is returned immediately to 3M’s factory or an authorized service station designated by 3M. A part will be presumed to have become
defective after its warranty period unless the part is received or 3M is notified of the problem no later than five (5) calendar days after the warranty period. If 3M is unable to repair
or replace the part within a reasonable time, then 3M, at its option, will replace the equipment or refund the purchase price. 3M shall have no obligation to
provide or pay for the labor required to install the repaired or replacement part. 3M shall have no obligation to repair or replace (1) those parts failing due to operator misuse, care-
lessness, or due to any accidental cause other than equipment failure, or (2) parts failing due to non-lubrication, inadequate cleaning, improper operating environment, improper
utilities or operator error.
replace the part, provided the defective part is returned immediately to 3M’s factory or an authorized service station designated by 3M. A part will be presumed to have become
defective after its warranty period unless the part is received or 3M is notified of the problem no later than five (5) calendar days after the warranty period. If 3M is unable to repair
or replace the part within a reasonable time, then 3M, at its option, will replace the equipment or refund the purchase price. 3M shall have no obligation to
provide or pay for the labor required to install the repaired or replacement part. 3M shall have no obligation to repair or replace (1) those parts failing due to operator misuse, care-
lessness, or due to any accidental cause other than equipment failure, or (2) parts failing due to non-lubrication, inadequate cleaning, improper operating environment, improper
utilities or operator error.
Limitation of Liability: 3M and seller shall not be liable for direct, indirect, special, incidental or consequential damages based upon breach of warranty, breach of contract,
negligence, strict liability or any other legal theory.
negligence, strict liability or any other legal theory.
The foregoing Warranty and Limited Remedy and Limitation of Liability may be changed only by a written agreement signed by authorized officers of 3M and seller.
Printed in U.S.A.
© 3M 2005
© 3M 2005
70-0710-0318-3
Industrial Business
Industrial Adhesives and Tapes Division
Bldg. 21-1W-10
900 Bush Ave.
St. Paul, MN 55106
1-800-362-3550
www.3M.com/packaging
900 Bush Ave.
St. Paul, MN 55106
1-800-362-3550
www.3M.com/packaging
3
Specifications:
Box:
Style: Regular slotted container (RSC)
Bursting test: 125 to 275 lbs. per sq. inch single or double wall, B or C flute.
Bursting test: 125 to 275 lbs. per sq. inch single or double wall, B or C flute.
Size:
Min
Max
Length
6" (150mm)
21.5" (546mm)
Width
6" (150mm*)
No limit
Height
4.75" (121mm)
24.5" (622mm)
*3.75" [90mm] with taping heads adjusted to apply 2" [51mm] tape
leg lengths and upper mast stops relocated.
Weight: Up to 85 lbs. [38.6kg]
Packing: Contents must support flaps.
Packing: Contents must support flaps.
Note: The 3M-Matic
™
700r-s can accommodate most boxes within the
size range listed above. However, if
Box length in Direction of Seal
Box length in Direction of Seal
is less than .5
Box Height
boxes should be test run to ensure proper machine performance.
Tape:
Scotch
Scotch
™
brand pressure sensitive box sealing tapes.
Width: 1.5 inches [36mm] minimum to 2 inches [50mm] maximum
Roll diameter: up to 16 inches [406mm] maximum on a 76.2mm
diameter on 3 inch [76.2mm] diameter core.
diameter on 3 inch [76.2mm] diameter core.
Machine:
Power:
Electrical — 115 V, 60Hz, 3.8A , 440 watts, 8 ft. [2.4m] power
Power:
Electrical — 115 V, 60Hz, 3.8A , 440 watts, 8 ft. [2.4m] power
cord with grounded plug included.
Pneumatic – 70 PSIG [4.8 bar gauge pressure] 3.75 SCFM
[.14 l/min @ 21°C, 1.01 bar] at 15 boxes per minute.
A pressure regulator is included.
A pressure regulator is included.
Weight:
429 lbs.[194.6kg] uncrated
501 lbs. [227kg] crated
501 lbs. [227kg] crated
Operating rate: Up to 15 boxes per minute. Actual production rate is
dependent on box size, box size mix, and operator dexterity
box length.
box length.
Box drive belt speed: 75 fpm [.38 m/s]
Operating conditions: Use in relatively clean environments
Operating conditions: Use in relatively clean environments
at 40°F to 120°F with clean, dry boxes.
Machine should not be washed down.
Footprint:
Infeed/Exit
Conveyor
Conveyor
3M-Matic
™
Stainless Steel Random Case Sealer 700r-s
W
F
H
Box Travel
C
B
A
F
L
W L
H A* B C* F
Min inches (mm)
31(787) 40.5 (1030)
53 (1346)
18 (457)
24 (610)
4 (102)
24.5 (622)
Max inches (mm)
31(787) 40.5 (1030)
86 (2184)
18 (457)
35 (889)
4 (102)
24.5 (622)
Masts in upper
90 (2290)
20.5 (521)
position
max
min
31 [780] max
* Exit conveyors are optional
T=64.5 (1637)
** Casters are optional
T
Infeed
Conveyor
Supplied
Conveyor
Supplied
Air Hose
Connection
Connection
Control Side
AccuGlide
™
, 3M-Matic
™
,
and Scotch
®
are trademarks
of 3M.
3
3M-Matic
™
Stainless Steel
Random Case Sealer 700r-s
Random Case Sealer 700r-s
Productivity
in corrosive
environments