Arcam dv88 Handbuch

If your display device is capable of accepting a progressively 
scanned video signal, you may wish to connect the progressive 
(525P(480P)) video output from the DV88. This is a second, 
higher quality, component video connection that outputs a video 
signal when the DV88 is playing 525 (NTSC) source material.

Note that progressive video output is switched off whenever 
the DV88 is giving out 625 (PAL) video due to current legal 
restrictions. If you are unsure if your display can accept a 
progressive video output, please refer to its instruction manual 
or consult your dealer.

To connect the progressive (525P(480P)) output of the DV88 to 
your display, use the three phono connectors above the SCART 
socket and follow the instructions for connecting progressive 
video in the manual for your display device.

Audio delay
Because progressive scan video processing takes several 
pictures (frames) to produce a higher quality video output, the 
audio signal needs to be delayed so that video and audio remain 
synchronised.

The audio delay setting appears on page 3/3 of the ‘Audio 
Setup’ menu and can have the values ‘Normal’ or ‘Progressive’:

Normal 

Choose this setting if you are using one of the 
standard video outputs

Progressive  Choose this setting to watch video via the 

progressive video output of the DV88.

DV88 Progressive scan output

NOTE: Both the progressive video component output and 
regular component video output are active when playing 525 
(NTSC) material. The setting of the ‘HQ video’ parameters in  
page 2/3 of the Setup menu does not affect the progressive 
video output in any way.

A u d i o   S e t u p

3 / 3

D i g   o u t :

S t e r e o   P C M

O S D   L a n g :

E n g l i s h

A u d i o   d e l a y : P r o g r e s s i v e

DV88 progscan.id

06/15/01, 6:32 PM

1