Avision av8000s Benutzerhandbuch

 

2-3 

 

 

 

 
Whenever you need to move the scanner to a new 
location it is advisable to lock the shipping switch to 
avoid causing damage to the scanners’ internal 
mechanism. Please follow the instructions below to lock 
the shipping switch. 

 

1). 

Turn off the scanner. 

2). 

Lift the Document cover to reveal the flatbed glass 

and scanning unit. 

3). 

Turn on the scanner. 

4). 

Turn off the scanner again while the scanning unit 

moved to the end for a few seconds. 

5). 

Lock your scanner by moving the lock switch on 

the left side of the scanner to the "Lock position".   

 
When you have several devices on a SCSI chain, you 
may need to adjust the SCSI ID selector setting located 
on the back of the scanner.  This setting assigns a 
specific "device ID" to the scanner.  If the assignment 
conflicts with an existing SCSI device, please select a 
new ID. (See Figure 2-2) 

Note: The factory setting for scanner is ID 6.  Usually, ID 
0 is assigned to an internal hard disk drive, and ID 7, ID 
8 ,and ID 9 are not in actual use. 

Using a suitable tool, turn the selector switch until the 
arrow points to the desired ID number.