Avision av8000s Benutzerhandbuch
10-3
10.3 CLEANING THE ADF
From time to time the pad assembly and feeding rollers
may become contaminated with ink, toner
particles or paper dust. In this case the
scanner may not feed documents smoothly or several
documents may feed at once. If this occurs please
follow the cleaning procedures to return your scanner to
its original state.
may become contaminated with ink, toner
particles or paper dust. In this case the
scanner may not feed documents smoothly or several
documents may feed at once. If this occurs please
follow the cleaning procedures to return your scanner to
its original state.
i). Moisten a cotton swab with isoprophyl alcohol
(95%). (Cleaner kits are available from
PictureVision.)
PictureVision.)
ii).
Carefully open the ADF to the left . Wipe the
feeding rollers by moving the swab from side to
side. Rotate the rollers forward with your finger
and repeat the above cleaning procedures until
the rollers are clean. Be careful not to snag or
damage the pick springs.
feeding rollers by moving the swab from side to
side. Rotate the rollers forward with your finger
and repeat the above cleaning procedures until
the rollers are clean. Be careful not to snag or
damage the pick springs.
iii).
Wipe the pad in the direction from top to bottom.
Be careful not to hook the pick springs.
Be careful not to hook the pick springs.
iv).
Close the ADF unit. Your scanner is now ready
for use.
for use.
Opening the ADF unit and Document Cover
ADF
feed
module
ADF
Feeding
Rolle