APRILIA leonardo 125 Benutzerhandbuch

Seite von 88
54
use and maintenance  Leonardo 125 - Leonardo 150 - Leonardo 250
2%-/6).'
4(% &2/.4 )..%2 3()%,$
Carefully read p. 39 (MAINTENANCE).
Position the vehicle on the centre stand.
★ 
Remove the footboard mat (1).
Unscrew  and  remove  the  two  fastening
screws (2) of the bag hook.
Remove the bag hook (3).
Unscrew and remove the screw (4).
Remove the front cover, see p. 53 (RE-
MOVING THE FRONT COVER).
★ 
Unscrew and remove the screw (5).
★ 
Unscrew and remove the screw (6).
★ 
Unscrew and remove the screws (7).
★ 
Unscrew  and  remove  the  screw  (8)
and take the relevant washer.
a
CAUTION
Proceed with care. 
Do  not damage  the  tangs  and/or  their
seats.
Handle the plastic and painted compo-
nents with  care and avoid scraping  or
damaging them.
Withdraw  and  remove  the  front  inner
shield by rotating it toward the saddle.
a
CAUTION
Upon reassembly, fit the tangs correctly
in the appropriate seats.
)$,).' !$*534-%.4
Carefully read p. 39 (MAINTENANCE).
Adjust the idling every time it is irregular.
To carry out this operation, proceed as fol-
lows:
Ride  for  a  few  miles  until  reaching  the
normal  running temperature, see  p. 17
(Coolant  temperature  indicator  “
h
”),
then stop the engine.
Position the vehicle on the centre stand.
Remove  the  left  inspection  cover,  see
p. 52  (REMOVING  THE  RIGHT  AND
LEFT INSPECTION COVERS).
Connect an electronic revolution counter
to the spark plug cable.
Start the engine.