APRILIA quasar 125 Benutzerhandbuch
18
use and maintenance
Quasar 50 - 100 - 125 - 180
MAIN INDEPENDENT CONTROLS
CONTROLS ON LEFT HANDLEBAR
CAUTION
The electric
components will only work when the
ignition switch is in position "".
ignition switch is in position "".
1) STARTER BUTTON (
)
Press the starter button "
" to operate the
starter motor that turns the engine over.
2) DIMMER SWITCH (
- )
Take switch to ≈
∆ position to switch on
parking lights/low beam.
Take switch to ≈
Take switch to ≈
∆ position to switch on
the high beam.
CAUTION
The dimmer switch is
enabled only when engine is running.
3) EMERGENCY FLASHER BUTTON(
)
Press this button (marked with relevant
symbol) to activate all turn indicators at the
same time.
symbol) to activate all turn indicators at the
same time.
4) TURN INDICATOR SWITCH (
)
To indicate the turn to the left, move the
switch to the left; to indicate the turn to the
right, move the switch to the right.
Push in to cancel the indicators after
turning.
switch to the left; to indicate the turn to the
right, move the switch to the right.
Push in to cancel the indicators after
turning.
5) CHOKE LEVER (
)
The choke device to start the engine from
cold is operated by rotating the lever "
cold is operated by rotating the lever "
"
leftwards.
To disconnect the choke device, set the
lever (
To disconnect the choke device, set the
lever (
) back to its initial position.
6) HORN BUTTON (
)
Press this button to operate the horn.
IGNITION SWITCH
The ignition switch (7) for
can be
found on front shield right-hand side. For
can be found on the instrument
panel under the multifunction computer.
Two keys are supplied together with the
vehicle (one spare key).
Two keys are supplied together with the
vehicle (one spare key).
CAUTION
Store the spare key
in a safe place (other than the vehicle).
50
100
125
180
3
4
5
6
2
1
7