australian-monitor amis mcs1 Benutzerhandbuch
AMISMCS1
Microphone Splitter/Combiner
Introduction
The Australian Monitor Installation Series MCS1 mic splitter/combiner
produces 2 balanced XLR signals, (1 direct, 1 transformer isolated) from a
single balanced XLR input. The AMIS MCS1 provides a ground lift switch to
eliminate hum, & as part of the AMIS Contractor Tools range, the AMIS
MCS1 is an inexpensive splitter/combiner that has a multitude of uses in a
wide variety of installations.
single balanced XLR input. The AMIS MCS1 provides a ground lift switch to
eliminate hum, & as part of the AMIS Contractor Tools range, the AMIS
MCS1 is an inexpensive splitter/combiner that has a multitude of uses in a
wide variety of installations.
Description
• Input: This balanced XLR input receives signal from a mic or other
source.
• Thru Output: This balanced XLR output is wired in parallel to the Input
& provides a balanced signal output.
• Output: This XLR output provides a transformer isolated output of the
input signal feed.
• GND Lift Switch: When this switch is in “ground” position pin1 of both
the input & the output are connected. When this switch is in “lift”
position these grounds are separated. This switch is used to
eliminate hum.
position these grounds are separated. This switch is used to
eliminate hum.
Specifications
Input
impedance:
600 Ohms
Output Impedance:
600 Ohms
Dimensions:
95mm x 73mm x 40mm
Weight: 305.5g