acec ab256b Benutzerhandbuch

All cookings must be carried out

with the oven door closed

Once the oven has been installed:

a) set the thermostat knob to MAX;
b) switch the oven function control knob to
conventional cooking (

);

c) allow the oven to run empty for approximately

45 minutes;
d) open a window for ventilation.

During this time, an unpleasant odour may be emitted.

This is absolutely normal, and is caused by residues of

manufacturing.

Once this operation is carried out, let the oven cool

down, then clean the oven cavity with a soft cloth soaked

in warm soapy water.

Before cooking for the first time, carefully wash the

shelf and the dripping pan.

To open the oven door, always catch the

handle in its central part (Fig. 3).

Fig. 3

FO 0799

When the oven is first installed

- Place the spit-support frame into the third grid

runner from the bottom of the oven (Fig. 4).
- Pierce and secure well food on the spit.
- Fit the spit tip into the spit motor drive in the

back of the oven and lay its front part on the fra-

me groove.
- Remove the spit handle.
- Turn the oven function control knob on

Leave the oven door closed

Set the thermostat function knob on 200°C

maximum.

FO 0329

Fig. 4

Cooking with the turnspit

The Safety Thermostat

This oven is provided with a safety thermostat. In case of

malfunctioning of the main thermostat, and consequent

over-heating, the safety device will stop the power supply

to the appliance. If this happens, call your local Service

Centre. Under no circumstances should you attempt to

repair the appliance yourself.