Autotek autocad raster design 2010 Benutzerhandbuch

■

Enter c to convert the mask to image clips.

■

Enter o to redefine mask properties. For more information, see

 (page 139).

■

Enter x to exit the command.

Command Line

-imask

You can have two enabled masks per drawing: one in model space and one
in paper space.

If you create more than one mask in model space or paper space, the most
recently created mask is enabled; all other masks in that space are disabled
automatically.

The mask boundary is still visible in the drawing, but the images that cross
the mask boundary are not clipped. You can edit the mask boundary when
the mask is disabled, but the affected images are not clipped until the mask
is enabled again.

If you used the Hide Image(s) option for the mask, then the images that were
affected by the mask are shown when you disable the mask.

If you used the Unload Image(s) option for the mask, then the images are
reloaded when you disable the mask.

The images are clipped and the mask properties control the display of the
images that are outside the mask boundary.

Only one mask in model space or paper space can be enabled. If you create
more than one mask, the most recently created mask is enabled automatically;
all other masks in that space are disabled. If you manually enable a mask, then
all other masks are disabled automatically.

Changing an Existing Mask | 141