Autotek autocad raster design 2010 Benutzerhandbuch
Quick Reference
Menu
Image ➤ Remove ➤ Line
Raster Design Toolbar
Command Line
irubline
Rubbing a Raster Arc
You can remove a raster arc by picking the start, center, and end points of the
raster arc. You must set an appropriate line width. For more information, see
raster arc. You must set an appropriate line width. For more information, see
(page 266).
NOTE Unlike previous versions of Raster Design, rubs permanently change the
raster data after you have saved the image. They do not temporarily remove raster
data from the display. To reverse a rub, use the AutoCAD UNDO command.
raster data after you have saved the image. They do not temporarily remove raster
data from the display. To reverse a rub, use the AutoCAD UNDO command.
To rub a raster arc
1 Set an appropriate line width for the rub.
2 Click Image menu ➤ Remove ➤ Arc.
3 Select the start point of the raster arc you want to remove.
4 Select the center point of the raster arc.
5 Select the end point of the raster arc to remove the raster arc.
Quick Reference
Menu
Image ➤ Remove ➤ Arc
Raster Design Toolbar
150 | Chapter 6 Modifying Images