Autotek autocad raster design 2010 Benutzerhandbuch
To remove the raster data within a circular region
1 Click Image menu ➤ Remove ➤ Circular Region.
2 Select the center point of the raster circle you want to remove.
3 Select the second point to define the radius of the raster circle.
Quick Reference
Menu
Image ➤ Remove ➤ Circular Region
Raster Design Toolbar
Command Line
irubcirc
Rubbing Raster Data Within a Diagonal Region
You can rub raster data within a diagonal parallelogram.
NOTE Unlike previous versions of Raster Design, rubs permanently change the
raster data after you have saved the image. They do not temporarily remove raster
data from the display. To reverse a rub, use the AutoCAD UNDO command.
raster data after you have saved the image. They do not temporarily remove raster
data from the display. To reverse a rub, use the AutoCAD UNDO command.
To rub the raster data within a diagonal region
1 Click Image menu ➤ Remove ➤ Diagonal Region.
2 Select a starting point for the diagonal region. This point can be any
corner of the area you want to remove.
3 Select a second point to define one of the edges of the region you want
to remove.
4 A bounding parallelogram is displayed to help you select the next point.
5 Select the third point to remove data within the diagonal rectangle or
parallelogram.
Rubbing Raster Data Within a Diagonal Region | 153