Autotek autocad raster design 2010 Benutzerhandbuch

you can use to edit the line work. This feature is particularly useful for
providing numeric values for coordinates, line length, and angle. When
Dynamic Input is disabled, the prompts appear only on the command line.

To configure the pointer input and the dimension input, use the AutoCAD
command DSETTINGS to open the Drafting Settings dialog box.

To turn Dynamic Input on and off, use the AutoCAD system variable
DYNMODE, which has four settings:

■

0 to turn off all Dynamic Input features

■

1 to turn on pointer input

■

2 to turn on dimensional input

■

3 to turn on both pointer and dimensional input

See AutoCAD Help for more information on Dynamic Input.

This one-pick selection method for Line and Polyline tools vectorizes a raster
line with a single click.

ProdNameShort automatically corrects the resulting line to conform to current
drafting settings. The following sequence of decisions applies:

■

If AutoCAD SNAP is active, the start point and the endpoint are snapped
to the grid. No other correction is performed.

■

If AutoCAD SNAP is inactive but OSNAP is active, ProdNameShort adjusts
points that are within the tolerance defined in the Correction Tolerance
section on the VTools General tab of the Raster Design Options dialog box.
If both ends of the line are osnapped, no further correction is performed.

Using SmartCorrect | 205