Autotek autocad raster design 2010 Benutzerhandbuch

This value is also used if you have Rub selected as your VTools Removal
Method. As you trace your raster objects, the vectorization tools use the
rub/crop line width to determine the width of the raster that is rubbed. For
more information, see 

 (page 250).

Changes that you make to Autorub at the command line update the settings
in the Raster Design Options dialog box:

■

If you turn AutoRub off, None is selected as the VTools Removal Method
in the Raster Design Options dialog box.

■

If you turn AutoRub on, Rub is selected as the VTools Removal Method in
the Raster Design Options dialog box.

■

If you use the AutoRub command at the command line to change the
rub/crop line width, the value is updated in the Raster Design Options
dialog box.

NOTE You can type autorub to use the command transparently.

1 Click Image menu  ➤  Options. The 

 (page 351)

dialog box is displayed.

2 Click the Feature Settings tab.

3 Do one of the following:

■

Type a value (in AutoCAD units) in the Rub/Crop Line Width box.

■

Click Pick and then pick two points on your image to define the line
width.

4 Click OK to exit the dialog box.

Menu

Image  ➤  Options

Raster Design Toolbar

Rub and Crop Line Width | 267