Avaya 4600 Benutzerhandbuch
4600 Series IP Telephone Installation Guide
Static Addressing Installation
3-6
where
dd
is the value of the Differential Services signaling parameter.
7.
Enter a valid value (between 0 and 63) for the new value of the Differential Services signaling
parameter.
parameter.
If no new values were entered during this procedure, the following text is displayed left-
justified at the top of the display:
justified at the top of the display:
Press # to terminate the procedure.
If new values were entered during this procedure, the following text is displayed left-justified at
the top of the display:
the top of the display:
Press the
*
button to terminate the procedure, or the
#
button to save the new values. If you
press the
#
button, the following text is displayed:
The new values are saved, and the user interface is restored to its previous state.
Secondary Ethernet (Hub) Interface Enable/Disable
3
Use the following procedure to enable or disable the hub interface.
1.
While the phone is on-hook and idle, press the following sequence of keys on the faceplate of
the telephone:
the telephone:
Hold 4 6 8 #
(
Hold I N T #
)
One of the following texts is displayed left-justified at the top of the display, depending on the
current value of the hub:
current value of the hub:
2.
Press the
1
or
0
button to enable or disable the hub interface respectively, or the # button to
leave the current value.
No new values.
#=OK
Save new values?
*=no #=yes
New values
being saved
The default for the hub interface is enabled.
If HUB=enabled:
HUB=enabled
0=disable #=OK
If HUB=disabled:
HUB=disabled
1=enable #=OK