HP 20-700 Benutzerhandbuch

Chapter 4

Operating in Automated Mode 101

Chapter 4

Cleaning Cartridge Usage Count

This procedure assumes that you have loaded cleaning cartridges into the 

reserved cells and have subsequently reset the library. (Taking these steps 

enables the Auto Clean function.) You then can check the usage count of 

cleaning cartridges in the reserved cells or in both the reserved cells and the 

CAP.

Cartridges in the Reserved Cells

Cartridges in the Reserved Cells

Cartridges in the Reserved Cells

Cartridges in the Reserved Cells
To check the number of times that the cleaning cartridges have been used 

since they were loaded into the reserved cells in the library:
1. Press the [MENU] button to return to the Main Menu.
2.  Press the arrow buttons until the cursor underscores CLEANING INFO.
3. Press 

the 

[SELECT] button.

The panel displays the Cleaning Info menu (see 

 on page 47).

4.  Press the arrow buttons until the cursor underscores EXPORT CARTRIDGE.
5. Press 

the 

[SELECT] button.

The Export Clean Cartridges screen appears, which lists all reserved cell 

cleaning cartridges by domain (or drive type), VOLSER, and usage count.

Note

If the usage count for a cleaning cartridge has exceeded its 

warning count, the export screen will display EXPIRED. You must 

remove this cartridge from the library.

6. Press 

the 

[MENU] button to exit the Export Clean Cartridges screen.

Cartridges in Reserved Cells and CAP

Cartridges in Reserved Cells and CAP

Cartridges in Reserved Cells and CAP

Cartridges in Reserved Cells and CAP
To check the usage count of all cleaning cartridges (those in the reserved cells 

and those in the CAP):
1. Press the [MENU] button to return to the Main Menu.
2.  Press the arrow buttons until the cursor underscores CLEANING INFO.
3. Press 

the 

[SELECT] button.

The panel displays the Cleaning Info menu (see 

 on page 47).

4.  Press the arrow buttons until the cursor underscores CLEAN CARTRIDGE 

INFO.