HP 20-700 Benutzerhandbuch
106 Operating in Automated Mode
Chapter 4
Caution
Possible damage to the hand assembly. Remove the magazine’s
retention cover before loading the magazine into the CAP.
4. Return the magazine to its closed position.
5. Press
5. Press
the
[CAP] button on the operator panel to close the CAP.
6. Press
the
[MENU] button to return the display to the Main Menu.
7. Press the arrow buttons until the cursor underscores CLEANING INFO.
8. Press the [SELECT] button.
8. Press the [SELECT] button.
The panel displays the Cleaning Info menu (see
9. Press the arrow buttons until the cursor underscores IMPORT CARTRIDGE.
10. Press the [SELECT] button.
10. Press the [SELECT] button.
The Import Clean Cartridges screen appears, which lists all reserved cell
cleaning cartridges by domain (or drive type), and VOLSER.
11. Select the cleaning cartridges you want to import by:
a. Moving the cursor to the desired cartridge entry on the list
b. Pressing
b. Pressing
the [SELECT] button. A selected cleaning cartridge is then
highlighted (in reverse video)
c. Repeating Steps a and b until you have selected all the cartridges you
want to import
Note
There is no “undo” available on this menu. If you select a
cartridge by mistake, you must exit the menu by pressing the
[MENU] button. Then you must start again at Step 10.
12. Press the [SELECT] button to import the cartridges.