HP 20-700 Benutzerhandbuch

164 DLT Drives and Tape Cartridges

Appendix A

Note

You can also use DLT Type IIIXT media, though it has a 

significantly reduced capacity and performance compared to 

DLT Type IV media.

Using DLT Tape Cartridges

In addition to the information provided in this manual, refer to the 

documentation provided with your DLT media for more information.

Caution

DLT tape drives require special cleaning cartridges and data 

cartridges formatted specifically for DLT. To avoid damage to 

your tape drive, it is critical to use appropriate DLT cleaning 

cartridges and properly formatted DLT data cartridges.

Inspecting DLT Cartridges

Note

Make it a practice to visually inspect your tape cartridges when 

loading or removing them from your tape library. Taking a few 

minutes to check the condition of your cartridges will lower the 

risk of repeated failures and help ensure uninterrupted backup. 

Repeated drive failures may indicate defective tapes. Tapes need to be 

inspected and replaced if they have been dropped, damaged, or used with a 

failed drive. To determine if the tapes have been damaged:

■

Gently shake the tape cartridge to verify that no internal parts are rattling.

■

Visually inspect the tape for a broken, unseated, or misaligned tape leader 

(item A in 

 on page 165).