HP color laserjet 2550 series Servicehandbuch

14. Snap both sides of the separation pad firmly into place until they click.

If the pad is not straight, or if space exists between the pad and the base, make sure that the
tabs on the pad are toward the front of the printer.

15. Hold down the new separation pad. Position the new pickup roller so that the button is

on the right side, and the open side of the roller faces down. Make sure that the small
ridge on the open side of the roller aligns with the groove in the shaft.

16. Slide the left and right idler rollers inward, against the pickup roller, until the idler rollers

click into place.

Chapter 3 Maintenance

ENWW