HP color laserjet 1600 series Servicehandbuch
7.
Align the print cartridge with the tracks inside the printer, and using the handles, insert the print
cartridge until it is firmly seated.
cartridge until it is firmly seated.
8.
Firmly close the front door.
9.
Turn on the printer. After a short time, the control panel should display Ready.
NOTE
If a cartridge is in the wrong slot or is the wrong type for the printer, the control
panel will display one of the following messages: Incorrect yellow, Incorrect magenta,
Incorrect cyan, Incorrect black.
Incorrect cyan, Incorrect black.
10.
Installation is complete. Place the used print cartridge in the box in which the new cartridge
arrived. See the enclosed recycling guide for recycling instructions.
arrived. See the enclosed recycling guide for recycling instructions.
11.
If you are using a non-HP print cartridge, check the printer control panel for further instructions.
For more information about using non-HP print cartridges, see
For more information about using non-HP print cartridges, see
NOTE
When replacing or changing a black print cartridge, a cleaning page will
automatically print. This helps prevent speckles on the front or back of printed
documents. A cleaning page can also be generated using the control panel or the
HP Toolbox. For information, see
documents. A cleaning page can also be generated using the control panel or the
HP Toolbox. For information, see
ENWW
Install input devices
27