HP dc71xx Benutzerhandbuch
![HP](https://files.manualsbrain.com/attachments/29005dca542c93ad59e01e223583dbd51961550d/common/fit/150/50/3931a36faa9f1af0627fe52b73d277ccf98e5d18c55433f253353db13ee5/brand_logo.jpeg)
Technical Reference Guide
361834-002
A-3
Error Messages and Codes
512-Chassis Fan Not Detected
Chassis fan is not connected.
514-CPU or Chassis Fan not
detected.
detected.
CPU fan is not connected or may have malfunctioned.
601-Diskette Controller Error
Diskette drive removed since previous boot.
605-Diskette Drive Type Error
Mismatch in drive type.
912-Computer Cover Removed
Since Last System Start Up
Since Last System Start Up
Cover (hood) removal has been detected by the Smart Cover Sensor.
914-Hood Lock Coil is not
Connected
Connected
Smart Cover Lock mechanism is missing or not connected.
916-Power Button Not Connected
Power button harness has been detached or unseated from the system
board.
board.
917-Expansion Riser Not Detected
Expansion (backplane) board not seated properly.
919-Front Panel, MultiPort, and/or
MultiBay Risers not Detected
MultiBay Risers not Detected
Riser card has been removed or has not been reinstalled properly in
the system.
the system.
1156-Serial Port A Cable Not
Detected
Detected
Cable from serial port header to I/O connector is missing or not
connected properly.
connected properly.
1157-Front Cables Not Detected
Cable from front panel USB and audio connectors is missing or not
connected properly.
connected properly.
1720-SMART Hard Drive Detects
Imminent Failure
Imminent Failure
SMART circuitry on an IDE drive has detected possible equipment
failure.
failure.
1721-SMART SCSI Hard Drive
Detects Imminent Failure
Detects Imminent Failure
SMART circuitry on a SCSI drive has detected possible equipment
failure.
failure.
1785-MultiBay incorrectly installed
For MultiBay option or
non-USDT systems:
Multibay option ribbon cables not seated or improperly attached.
or
MultiBay device not properly seated.
or
MultiBay diskette present
For integrated MultiBay/ USDT systems:
MultiBay device not properly seated.
or
MultiBay riser not properly seated.
non-USDT systems:
Multibay option ribbon cables not seated or improperly attached.
or
MultiBay device not properly seated.
or
MultiBay diskette present
For integrated MultiBay/ USDT systems:
MultiBay device not properly seated.
or
MultiBay riser not properly seated.
1794--Inaccessible device attached
to SATA 1
(for systems with 2 SATA ports)
to SATA 1
(for systems with 2 SATA ports)
A device is attached to SATA 1. Any device attached to this connector
will be inaccessible while “SATA Emulation” is set to “Combined IDE
Controller” in Computer Setup.
will be inaccessible while “SATA Emulation” is set to “Combined IDE
Controller” in Computer Setup.
Table A-2. (Continued)
Power-On Self Test (POST) Messages
Error Message
Probable Cause