HP dv6 Benutzerhandbuch

The optical drive spare part kit includes an optical drive bezel and an optical drive bracket.

Blu-ray ROM with LightScribe DVD±RW Super Multi Double-Layer Drive

603678-001

Blu-ray ROM DVD±RW Super Multi Double-Layer Drive

614333-001

DVD±RW and CD-RW Super Multi Double-Layer Combo Drive with LightScribe

603677-001

Before removing the optical drive, follow these steps:

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

Disconnect all external devices connected to the computer.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet

and then unplugging the AC adapter from the computer.

Remove the battery (see 

Remove the accessory cover (see 

Remove the optical drive:

Remove the Phillips PM2.5×4.0 screw (1) that secures the optical drive to the computer.

Slide the optical drive (2) to the left to disconnect it from the system board.

Remove the optical drive.

If it is necessary to replace the optical drive bracket, remove the two Phillips PM2.0×4.0

screws (1) that secure the bracket to the optical drive.

Component replacement procedures

51