HP dv6 Benutzerhandbuch

If it is necessary to replace the display enclosure or any of the display assembly internal

components:

a. Remove the Mylar screw covers (1). The screw covers are included in the Display

Miscellaneous Kit, spare part number 603659-001.

b. Remove the two Phillips PM2.5×7.0 screws (2) that secure the display enclosure to the

display assembly.

Remove the hinge covers (3). The hinge covers are available using spare part number

603666-001.

d. Turn the display assembly upside down, with the hinges toward you.

e. Lift the bottom edge of the display bezel/panel assembly (1) until it rests at an angle.

Disconnect the logo light cable (2) from the display panel cable.

g. Remove the display bezel/panel assembly (3).

If it is necessary to replace the webcam/microphone module:

a. Remove the Phillips PM2.0×4.0 screw (1) that secures the webcam/microphone module to

the display bezel.

b. Release the webcam/microphone module (2) as far as the webcam/microphone

module allows.

70

Chapter 4   Removal and replacement procedures