HP laserjet m712 Fehlerbehebungsanleitung
21.00.00 Page too complex To continue, touch “OK”
Description
The page decompression process was too slow for the product.
Recommended action
Press the
OK
button to continue. There may be some data loss.
33.WX.YZ Used board/disk installed
Description
An encrypted board or disk with existing data previously locked to a different product has replaced the
original. If you continue, data is permanently lost.
Recommended action
◦
To save the data on the board or disk, turn the product off. Replace the board or disk with another
board or disk.
◦
To delete the data on the board or disk and continue, press the
OK
button.
40.00.01 USB I/O buffer overflow To continue, touch “OK”
Description
The USB buffer overflowed during a busy state.
Recommended action
1. Press the
OK
button to print the transferred data. Some data might be lost.
2. Check the host configuration.
40.00.02 Embedded I/O buffer overflow To continue, touch “OK”
Description
Too much data was sent to the embedded HP Jetdirect print server. An incorrect communications
protocol might be in use.
Recommended action
1. Press the
OK
button to print the transferred data. Some data might be lost.
2. Check the host configuration.
40.00.03 EIO <X> buffer overflow To continue, touch “OK”
Description
The product displays this message when the EIO card in the indicated slot has overflowed its I/O buffer
during a busy state.
214
Chapter 2 Solve problems
ENWW