HP laserjet m712 Fehlerbehebungsanleitung

The black cartridge has reached the out condition.

Install a new toner cartridge.

The product indicates when the fuser kit is at its estimated end of life. The actual life remaining might be

different than the estimation. Have a replacement fuser kit available to install when print quality is no

longer acceptable.

The fuser kit does not need to be replaced now unless the print quality is no longer acceptable.

After the fuser kit reaches its approximated end of life, the HP Premium Protection Warranty

on that fuser kit ends.

Replace the fuser kit.

The fuser can be hot while the product is in use.

This alert appears only if the product is configured to stop when a supplies reach the very low

threshold. Two or more supplies have reached the estimated end of life. The product indicates when a

supply level is at its estimated end of life. The actual life remaining might be different than estimated.

The supply does not need to be replaced now unless the print quality is no longer acceptable.

HP recommends that the customer have a replacement supply available to install when print quality is

no longer acceptable.

When an HP supply has reached its approximated end of life, the HP Premium Protection

Warranty on that supply ends.

Recorded event codes depend on which supplies are at the end of life.

◦

10.00.70 (event code): Black toner cartridge

◦

10.23.70 (event code): Fuser kit

◦

10.22.70 (event code): Transfer kit

ENWW

Tools for troubleshooting

249