HP pavilion n5400 Servicehandbuch
Making Connections
Using the Modem
Using the Modem
62 Reference
Guide
To dial in to a network
You can use the modem to dial in to a LAN (local area network) that supports dial-in
connections. This gives you access to network resources from a remote location.
connections. This gives you access to network resources from a remote location.
• See Windows Help for information about setting up and using dial-in network
connections—click Start, Help and Support.
To change your modem settings
The modem is already set up to be compatible with telephone systems and modems in
most areas. However, in some situations, you may have to change modem settings to
match local conditions. If you have questions about local requirements, contact your
telephone company.
most areas. However, in some situations, you may have to change modem settings to
match local conditions. If you have questions about local requirements, contact your
telephone company.
• Control Panel. Open Phone and Modem Options in Control Panel to change many
modem settings. On the Modems tab click Properties to set connection speeds, or on
the Dialing Rules tab click Edit to set dialing options.
the Dialing Rules tab click Edit to set dialing options.
• Communications software. Many communications applications provide options for
controlling modem settings. See the help for your software.
• AT commands. You can control many aspects of modem operation using modem AT
commands. AT commands are special strings of characters sent to the modem to set
up specific conditions. Those command strings normally start with “AT” and contain
additional characters. For a list of AT commands for the built-in modem, see
“Modem Reference Information” on page 123.
up specific conditions. Those command strings normally start with “AT” and contain
additional characters. For a list of AT commands for the built-in modem, see
“Modem Reference Information” on page 123.
Open Phone and Modem Options in Control Panel. On the Modems tab, click
Properties. You can type AT commands on the Advanced tab in the space for Extra
settings.
Properties. You can type AT commands on the Advanced tab in the space for Extra
settings.
For example, to force the built-in modem to connect with V.34 modulation, you can use
the +MS command, as shown in the table of AT commands—type AT+MS=11 in the
space for extra settings.
the +MS command, as shown in the table of AT commands—type AT+MS=11 in the
space for extra settings.