HP proliant gbe2 Benutzerhandbuch
18
Appendix: Summary of features of the ProLiant BL p-Class
GbE2 Interconnect Kit
Switch performance
•
Store and forward mode layer 2 switching standard
•
Layer 3 routing firmware future internal upgrade capability
•
Layer 7 routing and content delivery switching future internal upgrade capability
•
Support for 3rd party external layer 7 content delivery switch / appliance
•
Support for F5 BIG-IP Blade Controller load balancer and traffic management
•
Frame forwarding throughput of 1.488 million packets per second (per Gigabit port)
•
17.9 million packets per second maximum external port (uplink) frame forwarding throughput per server blade enclosure
(64-byte packets)
•
24.0 Gb/s External port (uplink) bandwidth per server blade enclosure (full duplex)
•
10 Gigabit Ethernet uplink future upgrade capability
•
128 MB Main, 32 MB flash, and 2 MB packet buffer memory per switch (packet buffer memory shared between ports)
•
Auto-negotiation and auto-sensing with full-duplex support and ability to manually force port speed and duplex mode
•
Auto-MDI/MDIX on all ports enabled with auto-negotiation
•
2,048 MAC addresses per switch with automatic MAC address learning
•
ARP for IP to MAC address resolution
Switch network features
•
IEEE 802.3 10Base-T Ethernet, IEEE 802.3u 100Base-TX Ethernet, IEEE 802.3ab 1000Base-T Ethernet, and IEEE 802.3z
1000Base-SX
•
IEEE 802.1D spanning tree protocol (mono-spanning tree)
•
PVST+ and PVST compatibility when VLANs are untagged or use 802.1Q tagging; up to 16 spanning tree domains per
switch
•
Enable/disable and configure spanning tree port cost and priority on a per port basis
•
IEEE 802.3ad link aggregation (excluding LACP) supporting up to 12 multilink trunk groups with 6 ports per group;
compatible with Cisco EtherChannel trunking (Fast EtherChannel, Gigabit EtherChannel)
•
255 IEEE 802.1Q port based VLANs per switch
•
IEEE 802.3ac VLAN Ethernet frame extensions for 802.1Q tagging on a per port basis
•
Tagged and untagged ports as members of a VLAN
•
IEEE 802.3x flow control with manual configuration capability
•
NTP (network time protocol) client with time zone support
•
Real time clock (RTC) system time
Switch deployment and configuration
•
Default pre-configuration for immediate plug-in operation in the server blade enclosure
•
Set-up utility for a step-by-step customized configuration
•
Communicate to any and all server blade network adapters from any Ethernet external port
•
Manage both switches, access all iLO ports, and execute PXE from any external Ethernet port
•
Web-based interface accessible from any switch port
•
Command line interface (CLI) with scripting capability accessible from any switch port
•
Telnet access to the CLI and menu-driven console interfaces accessible from any switch Ethernet port
•
Integrated switch scripting within Rapid Deployment Pack for Windows v1.40 or greater
•
One serial and two Ethernet ports conveniently located on the front of each switch for additional uplinks and local
management, port mirroring, and other administration and diagnostic tasks
•
Configurable forwarding MAC address aging time settable to any value from 1 to 65,535 seconds (default is 300 seconds)