HP special edition l2000 compaq presario v2000 Servicehandbuch

Seite von 176
5–16
Maintenance and Service Guide
Removal and Replacement Procedures
Make note of which wireless antenna cable is attached to 
which antenna clip on the Mini PCI communications module 
before disconnecting the cables.
5. Disconnect the wireless antenna cables 1 from the Mini PCI 
communications module.
6. Spread the two retaining tabs 2 that secure the Mini PCI 
communications module to the communications 
compartment socket. (The side of the module opposite the 
socket rises up).
7. Remove the wireless communications module 3 by pulling 
the module away from the socket at a 45-degree angle.
Wireless communication modules are designed with a notch 4 
to prevent incorrect installation into the Mini PCI socket.
Removing a Mini PCI Communications Module
Reverse the above procedure to install a Mini PCI 
communications module.