Canon DR-G1130 Benutzerhandbuch
3-17
Chapter 3 Basic Operation
The [Scan Batch to File] dialog box opens
9.
Specify the file name and the file type for saving the
image data.
For details on other settings in the [Scan Batch to File]
dialog box, refer to the CapturePerfect 3.1 Operation
Guide.
image data.
For details on other settings in the [Scan Batch to File]
dialog box, refer to the CapturePerfect 3.1 Operation
Guide.
10.
Place your document and click [Save] to start
scanning.
scanning.
IMPORTANT
You must load your documents as described below, depending
on the specified Feed Option setting.
• If the [Standard Feeding] Feed Option is enabled, load your
on the specified Feed Option setting.
• If the [Standard Feeding] Feed Option is enabled, load your
documents before scanning. When all of the documents have
been scanned, the Continue Scanning dialog box appears.
been scanned, the Continue Scanning dialog box appears.
• If the [Manual Feeding] Feed Option is enabled, the
Separation Off key is lit and the Document Feed Tray is
raised. You must insert one page at a time to be scanned, and
press the Stop key to display the Continue Scanning dialog
box.
raised. You must insert one page at a time to be scanned, and
press the Stop key to display the Continue Scanning dialog
box.
• If a Feed Option other than [Standard Feeding] or [Manual
Feeding] is selected, once you have started scanning, each
document placed in the Document Feed Tray is scanned, and
when no document is loaded, the scanner enters the standby
state.
document placed in the Document Feed Tray is scanned, and
when no document is loaded, the scanner enters the standby
state.
• If the [Automatic Feeding] Feed Option is enabled, scanning
is performed automatically whenever a sensor in the
Document Feed Tray detects a loaded document, and
pressing the Stop key causes the Continue Scanning dialog
box to appear.
Document Feed Tray detects a loaded document, and
pressing the Stop key causes the Continue Scanning dialog
box to appear.
• If the [Panel-Feeding] Feed Option is enabled, the Start key
lamp is lit. You must load a document and press the Start key
to scan. Pressing the Stop key causes the Continue Scanning
dialog box to appear.
to scan. Pressing the Stop key causes the Continue Scanning
dialog box to appear.
Separation Off Key
Start Key
(Lamp Lights green)