Canon CP-100 Benutzerhandbuch
29
The printer has no power.
The printer’s indicator is flashing
red.
red.
The
(Direct Print mark) does
not display in the upper left
corner of the LCD monitor.
corner of the LCD monitor.
The printer does not print.
Printing stopped midway.
The compact power adapter or
AC cable is not correctly
connected.
AC cable is not correctly
connected.
There is a malfunction in the
printer.
printer.
The cable is not correctly
connected.
connected.
The printer’s power is off.
Your camera’s firmware is
incompatible with this printer.
incompatible with this printer.
The printer is not correctly
connected to the camera.
connected to the camera.
The camera’s batteries are
depleted.
depleted.
The printer’s battery pack is
depleted.
depleted.
The ink cassette is not loaded
correctly.
correctly.
Too much slack in the ink
cassette’s ink sheet.
cassette’s ink sheet.
The paper cassette is not
pushed all the way in.
pushed all the way in.
The printer has overheated.
The printer is not correctly
connected to the camera.
connected to the camera.
Be sure that the compact power
adapter and AC cable are
connected correctly. Be sure that
the AC cable is plugged in to a
standard household power
outlet.
adapter and AC cable are
connected correctly. Be sure that
the AC cable is plugged in to a
standard household power
outlet.
Press the ON/OFF button until
the indicator’s light turns off and
press it again until the printer
turns on.
the indicator’s light turns off and
press it again until the printer
turns on.
Connect the cable correctly
(
(
p. 22).
Turn the printer’s power on
(
(
p. 22).
Please check the Canon BeBit
website or your regional Canon
website (
website or your regional Canon
website (
p. 5).
Connect the cable correctly
(
(
p. 22). If the connection is
correct, the
icon will appear
on the camera’s LCD monitor.
Replace with fresh (fully
charged) batteries, or plug the
camera into a power outlet
(using the camera’s optional
compact power adapter).
charged) batteries, or plug the
camera into a power outlet
(using the camera’s optional
compact power adapter).
Use a new or fully charged
battery pack or use the printer’s
compact power adapter.
battery pack or use the printer’s
compact power adapter.
Load the ink cassette correctly.
Take up the slack.
Load the paper cassette.
Wait for the printer to cool down.
Connect the direct interface
cable correctly (
cable correctly (
p. 22).
Troubleshooting
If the printer does not seem to be working properly, run through the checks below
to see if you can identify and correct the problem. If you are not able to solve the
problem, please call your dealer or contact a Canon Customer Support help desk
for assistance.
to see if you can identify and correct the problem. If you are not able to solve the
problem, please call your dealer or contact a Canon Customer Support help desk
for assistance.
Problem
Cause
Correction