Canon irc2570, irc3170, irc3100 Handbuch

3-40

1) Make the following selections, and enter '1': COPIER>FUNCTION>SYSTEM>CHK-TYPE.

2) Make the following selections, and press the OK key to execute: COPIER>FUNCTION>SYSTEM>HDCHECK*.

3) When done, turn off and then on the main power.

1) Find the appropriate CHK-TYPE from the table 'HDD Format' ; then, make the followingselections, and type: COPIER>FUNCTION>SYSTEM>CHK-TYPE.

2) Make the following selections, and press the OK key to execute: COPIER>FUNCTION>SYSTEM>HD-CLEAR.

3) When done, turn off and then on the main power.

1)** Start up the machine in normal mode (i.e., turn on the main power while pressing the 1 and 7 keys ; then, make the following selections, and press the OK key:

COPIER>FUNCTION>SYSTEM>DOWNLOAD).

2) Execute formatting of DOSDEV4 using the Service Support Tool.

3) When done, turn off and then on the main power.

1) Replace the main controller (main) board.

2) Remove the image memory (SDRAM) and the boot ROM from the previous board, and mount them on the new board.

1)** Start up the machine in safe mode (i.e., turn on the power while pressing the 2 and 8 keys).

2) Format the HDD (ALL) using the Service Support Tool, and download the system software (SYSTEM, LANG, RUI).

3) When done, turn off and then on the main power.

1)** Replace the HDD, and start up the machine in safe mode (i.e., turn on the main power while pressing the 2 and 8 keys).

2) Format the HDD (ALL) using the Service Support Tool, and download the system software (SYSTEM, LANG, RUI).

3) When done, turn off and then on the main power.

1) Make the following selections, and enter '1': COPIER>FUNCTION>SYSTEM>CHK-TYPE.

2) Make the following selections, and press the OK key to execute: COPIER>FUNCTION>SYSTEM>HD-CLEAR.

3) When done, turn off and then on the main power.

1) Turn off the main power; then, turn on the main power while pressing the 1 and 9 keys (so that the machine will automatically start its remedial program*, turning

the control panel solid black).

2) When done (i.e., when the control panel turns white), turn off and then on the main power.

 If the machine does not run its remedial program in response to the foregoing step, go to E.

1) Find the appropriate CHK-TYPE in the table "HDD Format"; then, make the following selections and enter CHK-TYPE.

2) Make the selections, and press the OK key to execute: COPIER>FUNCTION>SYSTEM>HD-CHECK*.

3) When done, turn off and then on the main power.

1) Make the following selections, and enter '4': OPIER>FUNCTION>SYSTEM>CHK-TYPE.

2) Make the following selections, and press the OK key to execute: COPIER>FUNCTION>SYSTEM>HD-CHECK (1 to 5 min).

3) When done, turn off and then on the main power.

* Takes about 30 to 50 min.

** As necessary, ask the user to use the RUI to collect address book data, transfer settings, and user mode settings.

T-3-3

 / iR C2570 /  / iR C3170 /  / iR C3170i / iR C2570i

Remedy:

 if xxyy is 0713, 0725.
Remedy:

 if xxyy is 0813, 0825.
Remedy:

10,12,14,22,2
3,
24

The machine has encountered a system error or a packet data error.

Remedy:

DOSDEV

1

all relating to images (reservation, Box, fax); mode memory, routine 
task button

FSTDEV

1

DOSDEV2

1

FSTPDEV

1

DOSDEV3

2

PDL spool

PDLDEV

3

PDL-related file (font, registration form, ICCProfile)

DOSDEV4

4

user data (address book, transfer settings), system software

BOOTDEV

4

DOSDEV5

5

-

non specific

0

-

I

F

B

NG

NG

I

F

C

NG

NG

I

F

E

NG

NG

F

E

NG