Canon multipass l6000 Benutzerhandbuch

Troubleshooting

Chapter 10

MP L6000—USERS MANUAL/V000/12-97

Cannot send a 

The MultiPASS may have

Unplug the unit and let it

document

overheated.

cool for several minutes. Try
sending again.

The MultiPASS may not be

If you have a pulse line, be 

set for the type of telephone

sure the MultiPASS is set

line in use (pulse/tone).

for pulse dialing.

The document may not

Remove the document, stack

have been fed correctly

it, and load it into the ADF

into the MultiPASS.

correctly (see page 1-12).

Make sure the operator panel 
is closed.

The one-touch or coded

Check the one-touch or coded

speed dialing number you

speed dialing button and be

used may not be registered

sure it is registered correctly.

for the feature you want 
to use.

The receiving fax may be

Call the other party and ask

out of paper.

them to make sure paper is
loaded.

There may be other documents

Allow time for the current 

being sent from memory.

document to finish sending.

An error may have occurred 

Check the LCD for an error

during sending.

message.

The telephone line may not 

Make sure there is a dial tone

be working properly.

when you lift the telephone. 
If not, contact the local
telephone company.

The receiving fax machine may

Make sure the receiving fax 

not be a G3 fax machine.

machine is compatible with 
the MultiPASS (which is a G3
fax machine).

Images on faxes 

The receiving fax machine may

Check the MultiPASS by

received from the

not be working properly.

making a copy. If the copy is

MultiPASS are 

clear, the problem may be in 

spotted or dirty

the receiving fax machine.

The document may not be

Remove the document and

properly inserted in the 

load it correctly into the 

ADF.

ADF. See page 1-12.