Canon irc2570, irc3170, irc3100 Handbuch
Chapter 1
94
F-1-257
<Card Reader Mounting Kit-B>
[1] Card reader base 1 pc.
[2] Relay harness 1 pc.
[3] TP screw (M4X25) 1 pc.
[4] TP screw (M4X8) 1 pc.
[5] Toothed washer 2 pc.
[1] Card reader base 1 pc.
[2] Relay harness 1 pc.
[3] TP screw (M4X25) 1 pc.
[4] TP screw (M4X8) 1 pc.
[5] Toothed washer 2 pc.
F-1-258
1.6.5 Installation
0001-2930
iR C3100 / / / iR C3100N
When you have installed the Card Reader-C1, en-
ter the numbers of the cards to be used in service
mode (COPIER>FUNCTION>IN-
STALL>CARD); otherwise, the reader will not
recognize cards upon insertion.
mode (COPIER>FUNCTION>IN-
STALL>CARD); otherwise, the reader will not
recognize cards upon insertion.
1) Turn off the control panel power switch.
2) Turn off the main power switch.
3) Disconnect the power cable (from the power outlet)
2) Turn off the main power switch.
3) Disconnect the power cable (from the power outlet)
[3].
F-1-259
4) Disconnect the reader power cable [1].
5) Remove the 4 screws [2], and detach the rear right
5) Remove the 4 screws [2], and detach the rear right
cover [3].
F-1-260
6) Remove the face plate [2] of the rear right cover us-
ing nippers or the like.
C
[1]
[2]
[3]
[3] Disconnect.
[2] OFF
[1] OFF
ON/OFF