Canon pixma mp800 Befestigung Anweisungen

QT5-0033-V01

Start Here

Easy Setup Instructions

Turn on the machine.

Unlock the Scanning Unit.

Connect the power cord, then press [ON/OFF].

Use [

] or [

] on the Operation Panel to select the language for the LCD,

then press [OK].

The language setting is only available for some countries.

If the message <Install the print head and set the ink tank.> appears, go to Step
2, “Install the Print Head.”

Install the Print Head.

Lift the Scanning Unit (Printer Cover) until it locks into place.

Pull out the Paper Output Tray extension.

Install the ink tanks.

Prepare the ink tanks.

Insert the ink tanks.

Close the Inner Cover and the Scanning Unit (Printer Cover).

Align the Print Head from the Operation Panel.

This procedure is necessary to obtain a beautiful print result.
The Print Head positions is automatically aligned.
When the pattern shown on step 3-(3) is printed, the alignment is completed.
Be sure to align the Print Head to ensure print quality.

Open the Paper Support, then pull out the extension.

Load a few sheets of letter- or A4-size blank paper into the Auto Sheet Feeder.

Press [OK] to start Print Head alignment.

• Print head alignment will take several minutes to complete. Do not start another operation here.
• If the printed pattern matches the illustration, Print Head alignment is complete.

You can change the language displayed on the LCD.

For details, see “Selecting the Language for the LCD” in the Quick Start Guide.

Hardware setup and Print Head alignment is complete.

If you are connecting the machine to a computer for use, see the rear side of this sheet for
instructions on installing the software.

Unpack the machine

Please confirm bundled thing by the illustration printed on the flapped lid of the packing box.

Open the Inner Cover.

IMPORTANT (US Only)

Write down the serial number located inside
the machine. You will need this to register
your products.

Raise the lock lever.

IMPORTANT

If the Scanning Unit (Printer Cover) is left
open for more than 10 minutes, the Print Head
Holder moves to the right. Close and reopen
the Scanning Unit (Printer Cover) to return
the Holder to the center.

Prepare the Print Head.

(1) Remove the print head from its package.

CAUTION

There might be some transparent or light blue
ink on the inside of the bag the print head
comes in - this has no effect on print quality. Be
careful not to get ink on yourself when
handling these items.

(2) Remove the protective cap and discard it.

CAUTION

There might be some transparent or light blue
ink on the inside of the protective cap - this has
no effect on print quality. Be careful not to get
ink on yourself when handling these items.

(1) Open the Document Cover.
(2) Move the Scanner Lock Switch towards

the release mark to unlock the Scanning

Unit.

CAUTION

• Make sure to unlock the Scanning Unit before

turning the machine on.

• Before transporting the machine, always lock

the Scanning Unit by moving the Scanner
Lock Switch towards the lock mark.

release mark

(2) Connect the other end to the AC outlet.

(1) Connect one end of the power cord

to the rear of the machine.

(3) Press [ON/OFF].

(1) Press [ ] or [ ] to

select the language.

(2) Press

[OK].

Lift the Scanning Unit

(Printer Cover).

IMPORTANT

For safety, always firmly grip the areas illustrated when opening the Scanning Unit (Printer
Cover).

If the Paper

Output Tray does

not open, press

the Open Button.

When the machine is

turned on, lift up the

Scanning Unit (Printer

Cover) then wait for the

Paper Output Tray to

open.

Pull out the Paper

Output Tray extension.

Inner Cover

The Print Head Holder moves to the center.

Do not touch the Print Head Holder while it is

moving.

Serial Number

Location

Touch only the

lock lever!

Raise lock lever

completely.

Do not touch!

Remove the protective cap and discard it.

Insert the Print Head.

Lower the lock lever.

Insert.

Do not touch!

Lower the lock

lever carefully

and press it

down.

If the orange-colored protective film is

not removed completely, problems with

printing may occur.

(2) Twist off and discard

the orange protective

cap located on the

bottom of the ink

tank.

Do not press!

(1) Peel back the orange

tab completely and

remove the plastic

wrapper from the ink

tank.

IMPORTANT

Do not touch the
electrical contacts.

electrical contacts

(1) Insert the ink tank into the

rightmost slot.

Click

Refer to the color guide on

the print head lock lever.

(2) Press the

mark on the ink tank until it clicks into place

and then its lamp lights red.

Close the Inner Cover.

IMPORTANT

For safety, always firmly grip the areas illustrated when
closing the Scanning Unit (Printer Cover).

Click

(1) Open the Paper

Support.

(2) Pull out the

extension until

it stops.

(3) Pinch and slide

the paper guide

to the left end.

(2) Pinch and adjust the

paper guide to the

width of the stack.

(1) Load the paper with

the print side face up.

Ensure the paper stack does not

exceed the paper limit mark.

Align the paper with

the cover guide, then

slide the paper guide

toward the left edge of

the paper.

(1) This message appears.

If this message does

not appear after

closing the Scanning

Unit (Printer Cover),

see “Aligning The

Print Head

automatically” in the

User’s Guide.

(3) The machine will

print the Print Head

position pattern and

automatically align

the Print Head.

The pattern is

printed in black and

blue.

(2) Make sure <Yes> is selected,

then press [OK].

“Windows” is a trademark of Microsoft Corporation, registered in the United States and other countries.

“Macintosh” and “Mac” are trademarks of Apple Computer, Inc., registered in the U.S. and other countries.

Specifications are subject to change without notice.

xx2005A

PRINTED IN THAILAND