Canon pixma ip4300 Benutzerhandbuch

Seite von 102
“Waste tank (ink absorber
) full”/
“ink absorber
The printer has a built-in ink absorber to hold the ink used during Print head 
cleaning, for example.
This error message indicates that the ink absorber is nearly full.
You can continue printing for a while by selecting Continue
 in the display on 
your camera.
However, because printing is disabled once the ink absorber becomes 
completely full and until the ink absorber is replaced, you are recommended to 
contact a Canon service representative as early as possible. (You will need to 
replace a particular part of the printer.)
“No ink”
You can check the printer status according to the way the ALARM lamp on the 
printer (orange) and ink lamps (red) flash. Check the status of each lamp and 
take the appropriate action to resolve the error.
Printer ALARM lamp flashes orange four times and the ink lamp is off
The ink tank may not be installed properly.
Install the appropriate ink tank.
Printer ALARM lamp flashes orange four times and the ink lamp flashes fast 
(at about 1-second intervals)
Ink may have run out.
Replacing the ink tank is recommended.
If printing is in progress and you want to continue printing, select Continue
in the display on your camera with the ink tank installed. Then printing can 
continue. Replacing the ink tank is recommended after the printing. The 
printer may be damaged if printing is continued under the ink out condition.
See “Replacing an Ink Tank” on page 26.
If multiple ink lamps are flashing, check how fast they are flashing. Fast 
flashing (at about 1-second intervals) indicates the tank is empty. Slow 
flashing (at about 3-second intervals) indicates ink is low.
For details on different flashing speeds, see “Getting the Ink Level 
Information” on page 26.
Printer ALARM lamp flashes orange seven times and the ink lamp flashes 
fast (at about 1-second intervals)
Some ink tanks are not installed in the correct position, or more than one ink 
tanks of the same color are installed.
Confirm that the ink tanks are installed in the appropriate positions. See 
“Replacing an Ink Tank” on page 26.
Printer ALARM lamp flashes orange fourteen times and the ink lamp is off
The ink tank is not compatible with this printer.
Install an appropriate ink tank. See “Replacing an Ink Tank” on page 26.
Printer ALARM lamp flashes orange sixteen times and the ink lamp flashes 
fast (at about 1-second intervals)
Ink has run out.
Replace the ink tank and close the Top Cover.
Printing under the current condition may damage the printer.
If you want to continue printing in this condition, you need to release the 
function for detecting the remaining ink level. Press and hold the RESUME/
 button for at least 5 seconds, and then release it.
* With this operation, releasing the function for detecting the remaining ink 
level is memorized. Please be advised that Canon shall not be liable for any 
malfunction or trouble which may be caused by continuation of printing under 
the ink out condition.
See “Replacing an Ink Tank” on page 26.
Error Message On Camera