Canon PIXMA Pro9000 Benutzerhandbuch

Troubleshooting

Printed Surface is 
Scratched/Back of 
Paper is Smudged

Media is curled

If the paper is curled, it may become marked or not feed properly. Use paper 
after correcting paper curl as follows.
1. Place the paper on a flat surface with the print side

*1

 face up, then cover it 

with plain regular paper to avoid damaging the surface.

2. Roll up the paper in the opposite direction as shown in the figure below.

3. Check the printing paper if paper curl is corrected within approximately 2 

to 5 mm / 0.08 to 0.2 inches

*2

.

It is recommended to print the curl-corrected paper one sheet at a time.

Printer Does Not 
Start or Printer 
Stops During 
Print Jobs

Ink tank is empty

If the ink lamp is flashing fast, ink is empty. Replace the ink tank and close the Top 
Cover. If printing is not finished yet, just press the RESUME/CANCEL button on the 
printer to continue printing in the “no ink” state. Replace the ink tank as soon as 
possible after printing finishes.
Continuing to print in the “no ink” state may cause damage to the printer. See 

If multiple ink lamps are flashing, check how fast they flash. Fast 
flashing (at about one second interval) indicates the ink is empty. 
Slow flashing (at about three second interval) indicates ink is low. For 
details on different flashing speeds, see 

Ink tank is not 
installed in the 
correct position

If an ink lamp is flashing even though ink remains in that ink tank, it is inserted in 
the wrong position. Make sure that the correct ink tank color is inserted in each 
position. 
See 

on page 36.

(1)

*1

(2)

*2

*1