Canon pixma ip3000 Servicehandbuch
6
(3-1. Operator Call Error (cont’d))
LED
blinking
Error [Error code]
Corrective action
Remarks
9 times
The connected digital camera or
digital video camera does not
support Camera Direct Printing.
[2001]
digital video camera does not
support Camera Direct Printing.
[2001]
After removing the cable between
the camera and the printer, press the
Resume/Cancel button, and
re-connect the cable.
the camera and the printer, press the
Resume/Cancel button, and
re-connect the cable.
10 times
Automatic duplex printing
cannot be performed (paper
size not supported). [1310]
cannot be performed (paper
size not supported). [1310]
Press the Resume/Cancel button to
eject the paper being used at error
occurrence. Printing will resume
from on the front side of the next
page.
eject the paper being used at error
occurrence. Printing will resume
from on the front side of the next
page.
Data which was to be printed on
the back side of paper at error
occurrence is skipped (not
printed).
the back side of paper at error
occurrence is skipped (not
printed).
Failed in automatic print head
alignment. [2500]
alignment. [2500]
Press the Resume/Cancel button,
and after confirming the following,
perform print head alignment again:
and after confirming the following,
perform print head alignment again:
- Set an appropriate type and size
of paper (plain paper, A4 or letter).
- Check that the nozzle check
pattern is properly printed (all ink
ejected, no faint printing).
ejected, no faint printing).
- Protect the paper output slot from
exposure to excessive light.
11 times
Access cover open. [1200]
Close the access cover.
*1: Only for models supporting CD-R printing
*2: Only for models not supporting CD-R printing
*2: Only for models not supporting CD-R printing