Nikon COOLPIX 4500 Wartungshandbuch
VAA11901-R.3579.A
-D3・E4500-
Connector ①
Connector ②
③
• Remove the connectors
①
(3 pieces)
and the connector
②
.
• Remove the 2 screws
③
(1.7 x 3.5).
• The body unit can be removed from
the camera unit.
the camera unit.
Battery cover
①
Connector ②
SY1
PW1
CA3
Board holder
Battery shaft
• Remove the connector
②
, the
screw
①
(1.7 x 3.5) and the
connector
③
. The SY1 PCB
can be removed.
• Remove the 2 screws
• Remove the 2 screws
④
(1.7 x
3.5) to remove the board holder.
• Remove the connector
• Remove the connector
⑤
.
The
CA3 PCB can be removed.
• Remove the connector
• Remove the connector
⑥
and
the 2 screws
⑦
(1.7 x 3.5). The
PW1 PCB can be removed.
• Pull out the battery cover shaft
to remove the battery cover.
• Pull out the battery cover shaft
to remove the battery cover.
④
④
Connector ⑤
Conector ⑥
⑦
Battery holder
TB2
Spacer
Battery terminal
Spring
• Remove the insulation sheet.
• Remove the screw
• Remove the screw
⑧
(1.7 x 3.5). The TB2 PCB
can be removed.
• Remove the 2 screws
• Remove the 2 screws
⑨
(1.7 x 2.5)
.
The battery
contact (+ ,‐)can be removed.
• Remove the 2 screws
• Remove the 2 screws
⑩
(1.7 x 3.5) and the
2 hooks marked
○
. Then the battery holder can
be removed.
• Remove the spring by sliding it.
• Remove the spring by sliding it.
⑧
⑨
⑨
⑩
3. Separation of the camera unit
and camera body unit
4. PCBs and Battery Holder
Connector ③
Connector ①