Nikon SB-28 Benutzerhandbuch

All LCD (liquid crystal display) figures and marks do not appear at
the same time. They are shown together here for ease of explanation.

1 Flash mode indicator (P.22)

t Ø Automatic Balanced Fill-Flash with TTL

Multi-Sensor

tø Matrix Balanced Fill-Flash,

Center-Weighted/Spot Fill-Flash

t Standard TTL Flash

ƒ Manual Flash (P.46)

% FP High-Speed Flash sync (P.49)

" Repeating Flash (P.52)

˙ Non-TTL Auto Flash (P.42)

2 Film speed (ISO)/number of repeating flashes per

frame/frequency indicators (P.18 / P.52)

3 Flash shooting range indicator bars (P.13)

• Because LCDs are difficult to read when viewed from the side, you should look at

the LCD panel directly.

• LCDs are temperature sensitive and may turn black at high temperatures (approx.

60°C or 140°F). They clear up when the temperature returns to normal (20°C or
68°F).

• In cold temperatures (approx. 5°C or 41°F and below), the LCDs’ response time

slows down. This is typical of LCDs and no cause for concern. LCDs will function
properly once the temperature returns to normal (20°C or 68°F).

Press the

. button to turn the illuminator on. Press the button again to turn it off. The illuminator

turns off automatically after approx. 16 sec. when the SB-28 is not in use.

4 Red-eye reduction indicator (P.76)
5 Zoom-head position indicator (P.19)
6 Flash output level indicator (P.50)
7 Exposure compensation indicator (P.72)
8 Underexposure indicator (P.28)
9 Exposure compensation/underexposure value

(P.72 / P.28)

10 Flash shooting distance scale (m: meter) (P.13)
11 Flash shooting distance scale (ft: feet) (P.13)
12 Standby mode indicator (P.15)
13 AF assist illuminator LED canceled indicator (P.82)
14 Aperture indicator (P.42)

5