Samsung 15-1981 Benutzerhandbuch
5
Caution: To avoid damaging your
converter, make sure your converter is
not connected to an AC outlet before
setting
converter, make sure your converter is
not connected to an AC outlet before
setting
IRC/HRC/STD
.
Note: If you are not sure what type of
channel frequency system your cable
system uses, contact your local cable
company.
channel frequency system your cable
system uses, contact your local cable
company.
If the cable system in your area is not
standard, use a paper clip or other
pointed object to set
standard, use a paper clip or other
pointed object to set
IRC/HRC/STD
on
the bottom of the converter for the
type of cable system you have.
type of cable system you have.
Note: HRC and IRC are methods
used by some cable companies for
converting satellite and local broad-
cast channels to cable channels.
Channels 5 and 6 on IRC systems and
all channels on HRC systems are
slightly different frequencies from
those used on standard systems.
used by some cable companies for
converting satellite and local broad-
cast channels to cable channels.
Channels 5 and 6 on IRC systems and
all channels on HRC systems are
slightly different frequencies from
those used on standard systems.
CONNECTING THE
CONVERTER TO AC
POWER
CONVERTER TO AC
POWER
Plug the converter’s power cord into a
standard AC outlet.
standard AC outlet.
TURNING THE
CONVERTER ON/OFF
CONVERTER ON/OFF
To turn the converter on or off, press
POWER
on the front of the converter or
on the remote control.
15-1981.fm Page 5 Tuesday, March 30, 1999 9:09 AM